Yamaha UD-WL01 Connection Manual page 5

(D) Using Accesspoint mode
You will use your instrument as an access point to achieve a direct wireless connection between your instrument
and your smart device/computer.
NOTE Only an instrument which has the Accesspoint mode function can serve as an access point.
NOTE When your instrument is set to Accesspoint mode, no Internet access is available using a wireless LAN.
1.
Call up the wireless LAN display on the instrument.
For more information on how to call up the wireless LAN display, refer to the Owner's Manual or the Reference
Manual for your instrument.
2.
Set the instrument to the Accesspoint mode.
In the default setting, your instrument is set to Infrastructure mode. Select Accesspoint mode in the wireless
LAN display.
Example: CLP-585/CLP-575/CLP-545/CLP-535
System Menu > Utility > Wireless LAN Option > Wireless LAN Mode
The LED lamp on the UD-WL01 lights up, when the instrument is set to Accesspoint mode.
3.
If necessary, set the SSID, security, password, and channel.
When you are using more than one instrument, set a different SSID and channel for each instrument to avoid
interference.
4.
Store the settings.
Now your instrument is available as an access point, enabling a direct wireless connection between your
instrument and smart device/computer (see
Checking the IP and MAC addresses
You can check the IP address of your instrument and the MAC address of the UD-WL01 on the instrument's
Wireless LAN display. For more information, refer to the Owner's Manual or the Reference Manual for your particular
instrument.
The MAC address is also shown at the back of the UD-WL01.
USB Wireless LAN Adaptor: UD-WL01 Connection Manual
page 6).
MAC address
5