Table of Contents
Advertisement
Caller list
Viewing the caller list and
calling back
1
Press {^} or {V} to enter the caller list.
2
Press {V} to search from the most
recent call, or {^} to search from the
oldest call.
3
{C}
Note:
L KX-TG2622:
Each handset has its own caller list. If
you viewed the caller list or answered a
call on one handset, the same
information in the other handset is
displayed as "missed calls".
L You can also press {Rcvd calls} to
enter the caller list.
L If the same caller calls more than once, it
is displayed with the number of times the
caller called ("×2" to "×9"). Only the date
and time of the most recent call is
stored.
L A Q is displayed next to items which
have already been viewed or answered.
L If an arrow (¡ ) is displayed after the
number, the whole phone number is not
shown. Press {*} to see the remaining
numbers or to return to the previous
display. Each time you press {*}, the
display changes alternately.
Storing your area code
We recommend storing your area code
before using Caller ID (page 24). Calls
from the same area will be recorded in the
caller list without the area code. You do not
have to remove it before calling back the
caller or storing in the phonebook.
1
{MENU} i {0}{4}
2
Enter your area code (max. 8 digits).
L To correct a digit, press {<} or {>} to
move the cursor, then press
{CLEAR}. Enter the correct number.
3
{Save} i {OFF}
Note:
L The use of this feature can prevent a
National Call from being dialled.
For example, the "03" for South Island
callers will be omitted and will therefore
prevent a National Call to other areas of
the South Island.
To erase your area code
Press and hold {CLEAR} in step 2, press
{Save}, then press {OFF}.
Caller ID Service
25
Advertisement
Table of Contents
