Connecting The Ap To A Poe Power Supply; Connecting The Ap To The Network - HP 525 Installation Manual

Figure 13 Local power supply connection

Connecting the AP to a PoE power supply

CAUTION:
Identify the marks for the network port and console port to avoid connection mistakes.
When you apply 802.3af PoE power supply, connect one end of the network cable to the network port
on the AP, and the other end to an Ethernet port on a PoE-capable device (for example, a PoE-capable
Ethernet switch). If the uplink device of the AP is a PoE switch, use an Ethernet cable to directly connect
the Ethernet port of the AP to the PoE device as shown in
Figure 14 PoE connection

Connecting the AP to the network

APs can access the Internet or metropolitan area network (MAN) through the Ethernet uplink interface. To
implement Internet or MAN access, connect the Ethernet port of the AP to an Ethernet port of an Ethernet
switch.
Figure 14.(indoor used)
11