Additional Programme; Settings; Speedperfect G; Ecoperfect - Siemens WM14W640IL Instruction Manual And Installation Instructions

Additional programme settings
en
\

Additional programme

settings

An overview of all additional settings,
A d d i t i o n a l p r o g r a m m e s e t t i n g s
which can be selected depending on
the programme, can be found from
~ Page 16.

speedPerfect G

Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more energy
than, the selected programme, without
the speedPerfect G setting.
Do not exceed the maximum
Note:
load.
Overview of programmes ~ Page 16
ecoPerfect ¦
Energy-optimised washing by reducing
the temperature while achieving a
washing result that is consistent with the
selected programme, without the
ecoPerfect ¦ setting.

Prewash !

For heavily soiled laundry.
Notes
If intelligent dosage is selected, the
■
detergent will be dispensed
automatically for the prewash and
the main wash.
Set the i-Dos dosage to medium to
■
prevent overdosing.
If dosing manually, allocate
■
detergent to the prewash and the
main wash. Place detergent for the
prewash in the drum and add
detergent for the main wash to
compartment À Á.
24

Extra rinse l

Additional rinse cycle for particularly
sensitive skin and/or for areas with very
soft water.
Less Ironing æ
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
The washing's residual moisture
Note:
is increased.
1
Operating the
appliance
Preparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
From ~ Page 43.
Connect the mains plug.
1.
Turn on the tap.
2.
Open the door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.