Jeep 2014 Wrangler Owner's Manual page 346

344 UNDERSTANDING YOUR INSTRUMENT PANEL
SEEK Buttons
Press and release the SEEK buttons to search for the next
listenable station in AM/FM mode. Press the right switch
to seek up and the left switch to seek down. The radio
will remain tuned to the new station until you make
another selection. Holding either button will bypass
stations without stopping, until you release it.
SCAN Button
Pressing the SCAN button causes the tuner to search for
the next listenable station in AM, FM or Satellite (if
equipped) frequencies, pausing for five seconds at each
listenable station before continuing to the next. To stop
the search, press the SCAN button a second time.
Voice Command Button Uconnect® Phone — If
Equipped
Press this button to operate the Uconnect® Phone feature
(if equipped). Refer to "Voice Command" for further
details.
If your vehicle is not equipped with or this feature is not
available on your vehicle, a "Not Equipped With
Uconnect Phone" message will display on the radio
screen.
Phone Button Uconnect® Phone — If Equipped
Press this button to operate the Uconnect® Phone feature
(if equipped). Refer to "Uconnect® Phone" for further
details.
If your vehicle is not equipped with or this feature is not
available on your vehicle, a "Not Equipped With
Uconnect Phone" message will display on the radio
screen.