Multi-Unit Operation - Panasonic KX-TG1811 Operating Instructions Manual

TG1811_1812_1813AL(e-e).book Page 19 Friday, May 12, 2006 2:25 PM

Multi-unit Operation

Intercom between
handsets (KX-TG1812 and
KX-TG1813 only)
Intercom calls can be made between
handsets in the same radio cell.
Example: When handset 1 calls handset 2
1
Handset 1:
{INT} i Press {2} (desired handset
number).
2
Handset 2:
Press {C} to answer.
3
When finished talking, press {ih}.
Transferring calls/
conference calls, between
handsets (KX-TG1812 and
KX-TG1813 only)
Outside calls can be transferred between 2
people in the same radio cell. 2 people in the
same radio cell can have a conference call
with an outside party.
Example: When handset 1 transfers a call
to handset 2
1
Handset 1:
During an outside call, press {INT} i
Press {2} (desired handset number).
L The outside call will be put on hold.
L If there is no answer, press {INT} to
return to the outside call.
2
Handset 2:
Press {C} to answer the page.
L Handset 2 can talk with handset 1.
3
Handset 1:
To complete the call transfer, press
{ih}.
To establish a conference call, press {3}.
Multi-unit Operation
Transferring a call without speaking to
the other handset user
1
During an outside call, press {INT}. i
Press the desired handset number.
L k flashes to indicate the outside call is
on hold.
2
{ih}
L The outside call rings at the other
handset.
Note:
L If the other handset user does not answer
the call within 30 seconds, the call will ring
at your handset again.
19