Table of Contents
Advertisement
TG7331-7341FX(e-e).book Page 14 Monday, July 28, 2008 8:57 AM
Preparation
1
Firmly press the notch on the
handset cover and slide it in the
direction of the arrow.
2
Insert the batteries negative (T)
end first. Close the handset cover.
Rechargeable Ni-MH ONLY
Important:
L If the handset does not automatically
turn on after installing/replacing
batteries, press {ih} for about 1
second, or place the handset on the
base unit or charger.
Note:
L When replacing batteries, remove the
old batteries.
14
Battery charge
Place the handset on the base unit or
charger for about 7 hours before
initial use.
L While charging, "Charging" is
displayed and the charge indicator on
the handset lights up. When the
batteries are fully charged, "Charge
Completed" displays. The charge
indicator stays lit even after the
batteries are fully charged.
* Model shown is KX-TG7331.
Note:
L It is normal for the handset to feel
warm during charging.
L If you want to use the unit
immediately, charge the batteries for
at least 15 minutes.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
Advertisement
Table of Contents
