Panasonic KX-TCD705NL Operating Instructions Manual page 33

30678_KX-TCD705 Dutch_a_English
Transferring a Call using the Intercom
3. (Handset 2) When the unit rings, Z O, N, K to I, L
or $ (-Any Key Answer), to answer.
4. (Handset 1) Transferring a call Z P
• The transfer is completed
OR
To return to the External Call Z N.
Transferring a Call without the Intercom
This feature enables you to transfer an external call to another handset without waiting for
the paged handset to answer.
Eg. Handset 1 is transferring an external call to Handset 2.
1. (Handset 1)
During a call, Z N (Intercom icon turns on).
• The call is put on hold.
2. (Handset 1) Z desired handset no. eg. B
• You will hear an internal ring back tone until the other handset is
answered.
3. (Handset 1) Z P.
4. (Handset 2) When the unit rings, Z O or % to answer.
• The transfer is completed.
• If the paged handset is not answered within 30 seconds, a ring tone
sounds at the paging handset. The paging handset can return to the call by pressing
O. If the paging handset does not return to the call within 30 seconds, the external
call is automatically disconnected.
Conference
During an external call, you can make an intercom call to another handset and then
combine the calls together to establish a conference call. (The handsets have to be
registered to the same base unit).
1. (Handset 1) During an external call, Z N then enter the desired handset
number eg. B.
• The external call is put on hold.
• If there is no answer at handset No.2, Z N to return to the call.
2. (Handset 2) When the unit rings, Z O, N, K to I, L
or $ (-Any Key Answer) to answer.
3. (Handset 1) Z C to establish a conference call.
4. (Handset 1 or 2) Z P to hang up on conference call.
22/6/01 9:22 am Page 33
(continued)
33