Panasonic ST50T Operating Instructions Manual page 43

Menu Item
Surround
Volume Control (VAO)
Auto Gain Control
Volume Correction
Speaker Distance to
Wall
MPX
HDMI1 / 2 / 3 Input
Reset to Defaults
Connection Test,
Network Connection,
Wireless Network
Settings, IP/DNS
Settings
Network Link Settings
Software Update
New Software Message
Network Status
42
Adjustments / Configurations (alternatives)
Surround sound settings
[Off] / [V-Audio] / [V-Audio Surround] / [V-Audio ProSurround]
[V-Audio]:
Provides a dynamic enhancer of width to simulate improved spatial effects.
[V-Audio Surround]:
Provides a dynamic enhancer of width and depth to simulate improved spatial
effects.
[V-Audio ProSurround]:
Provides a more progressive enhancer and reverberation to simulate improved
spatial effects.
Controls the volume level of the sound output from AUDIO OUT terminals with the
TV remote control [TV] / [Audio Out (TV Off)] / [TV and Audio Out]
[TV]: Only the volume level of TV speakers is adjustable.
[Audio Out (TV Off)]: Only the volume level from AUDIO OUT terminals is
adjustable. (The sound of TV speakers is mute.)
[TV and Audio Out]: Controls both volume levels together.
Automatically regulates large sound level differences between channels and
inputs [Off] / [On]
Adjusts the volume of individual channel or input mode
Compensates for the low frequency sound due to the distance between the
speakers and the wall [Over 30cm] / [Up to 30cm]
●
If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
● If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
Selects multiplex sound mode (if available) (p. 83)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
Selects to fit the input signal [Digital] / [Analogue] (p. 88)
[Digital]: When sound is carried via the HDMI cable connection
[Analogue]: When sound is not carried via the HDMI-DVI adaptor cable
connection
●
For HDMI input
Press the OK button to reset the current Sound Mode, [Balance], [Headphone
Volume] and [Surround] to the default settings
Sets the network setting to use in your network environment (p. 65, 66)
Sets to control the TV with the devices connected to the network (p. 64)
Checks for available software updates from the Panasonic website
Selects whether to give a notification message when new software is found via
network [Off] / [On]
Displays the network status (MAC Address, current network settings, etc.)