Panasonic ST50T Operating Instructions Manual page 42

Menu Item
DVI Input Setting
Pixel Orbiter
Scrolling Bar
Reset to Defaults
Mode
Bass
Treble
Equaliser
Balance
Headphone Volume
Adjustments / Configurations (alternatives)
Changes the black level of the image for HDMI input mode with DVI input signal
manually [Normal] / [Full]
●
When the DVI input signal from the external equipment (especially from PC) is
displayed, the black level may not be suitable. In this case, select [Full].
●
The black level for HDMI input signal will be adjusted automatically.
●
For HDMI input mode with DVI input signal
Selects the mode for wobbling of the image to prevent panel "image retention"
[Auto] / [On]
[Auto]:
Automatically works only for the appropriate images and you rarely recognise
the wobbling.
Displays scrolling bar pattern to assist elimination of panel "image retention"
●
Press the OK button to start scrolling and press any buttons (except Standby) to
exit this mode.
●
For positive effect to eliminate "image retention", it may be necessary to display
for a long time.
Press the OK button to reset the current Picture Viewing Mode of the selected
input to the default settings
Selects your favourite sound mode for each input [Music] / [Speech] / [User]
[Music]:
Improves sound quality for watching music videos, etc.
[Speech]:
Improves sound quality for watching news, drama, etc.
● In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and
those settings will be stored for each mode.
[User]:
Adjusts the sounds manually by using the equaliser to suit your favourite sound
quality.
● For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass]
and [Treble]. Select [Equaliser] and adjust the frequency.
[Equaliser] (see below)
Adjusts level to enhance or minimise lower, deeper sound output
Adjusts level to enhance or minimise sharper, higher sound output
Adjusts the frequency level to suit your favourite sound quality
● This function is available when [Mode] is set to [User].
● Select the frequency and change the frequency level by using the cursor button.
●
To enhance the bass sound, raise the level of the lower frequency. To enhance
the treble sound, raise the level of the higher frequency.
●
To reset the levels of each frequency to the default settings, select [Reset to
Defaults] by using the cursor button, and then press the OK button.
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
41