Panasonic HX-DC2 Operating Instructions Manual page 42

HX-DC2
Caution:
Check that the status indicator has gone off.
1
Open the battery/card cover.

2
Insert (remove) the SD card into (from) the card slot.
≥ Face the label side B in the direction shown in the illustration and
press it straight in as far as it will go.
≥ Press the centre of the SD card and then pull it straight out.
42
VQT4F67
 

Status indicator A
≥ When this unit is
accessing the SD card
or built-in memory, the
status indicator lights up
red.