Panasonic HX-DC2 Operating Instructions Manual page 110

∫ To set the White Balance manually
1 Point the unit at a white subject that fills the screen.
2 Select the
≥ The LCD monitor display will go dark for a moment and then return to
the recording menu. When the
menu, the white balance has been set.
≥ When the brightness changes or the recording location changes and
the colour balance is not longer correct, check whether the white
balance setting is suitable for the light source.
≥
HX-DC2
If you turn on the unit with the lens cap still fitted, the auto white
balance will not be set correctly. Always remove the lens cap before
turning on the unit.
≥ [SCENE MODE] will be set to
is set to other than
to (BEACH),
110
VQT4F67
(WHITE SET) and press the SET button.
(AUTO) while the [SCENE MODE] (l 90) is set
(SUNSET), or
icon appears on the recording
(OFF) when the [WHITE BALANCE]
(FIREWORKS).