Panasonic KX-TGA800FX Installation Manual page 5

TGA800FX(fx).book Page 5 Thursday, August 21, 2008 5:16 PM
• When replacing the batteries:
- USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
- Do NOT use Alkaline/Manganese/Ni-Cd batteries.
- We recommend using the Panasonic rechargeable batteries noted in the
base unit's operating instructions for replacement battery information.
Place the handset on the charger for about 7 hours before initial use.
Note:
• The handset display may show "Please Wait..." when the handset is
placed on the charger if it is not registered to the base unit.
• If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends ( ,
S T
charge again.
Display language
16 display languages are available. You can select "Deutsch", "English",
"Magyar", "Polski", "SlovenČina", "ČeŠtina", "Hrvatski",
"Slovenscina", "Eesti", "LIETUVIŠKAI", "LatvieŠu", "Românã",
"БЪЛГАРСКИ", "Srpski", "МАКЕДОНСКИ", or "Shqip".
1
K (middle soft key) i N i M
2
{V}/{^}: "Display Setup" i M
3
{V}/{^}: "Select Language" i M
4
{V}/{^}: Select your desired language. i M i {ih}
Note:
• If you select a language you cannot read: {ih} i K i N i M i
{V} 2 times i M i {V} 4 times i M i {V}/{^}: Select your desired
language. i M i {ih}
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold {ih} for
few seconds to turn the handset on.
1
Handset:
Lift the handset and press {ih}.
2
Base unit:
Proceed with the operation for your model.
N KX-TG8011
Press and hold {x} for about 5 seconds. (No registration tone)
N KX-TG8021
Press and hold {x} for about 5 seconds, until the registration tone sounds.
) and the charge contacts with a dry cloth and
5