Using The Surround Back Speakers - Panasonic SH-FX67 Operating Instructions Manual

Setup

Using the surround back speakers

To activate the second SH-FX67 for 7.1ch-setup, it is necessary
to be paired to work with the other SH-FX67.
Use only the SH-FX67T transmitter card.
Wireless system is originally paired to work with the SH-
FX67T transmitter card that comes along with it. For any
other accessories to work with the SH-FX67T transmitter
card in use, pairing is necessary.
Wireless system
e.g. After pairing
≥
Keep the transmitter cards of the additional wireless system for
later use.
10
10
Home theater unit
Pairing is necessary.
Additional ireless system
Preparation
≥
Make sure to connect the AC mains lead of the additional
wireless system.
≥
Turn on the home theater unit and reduce the volume.
1 Turn on the additional wireless system.
2 While pressing the skip and slow-search button (e.g. [5/
9] ) on the home theater unit, press the numbered button
[3] on the remote control until "P" lights in the home theater
unit's display.
3 While "P" is displayed, press
[I/D SET] on the rear of the
additional wireless system.
≥
If "P" goes off before you
press [I/D SET], repeat step 2 and then continue the
procedure.
4 While pressing [5/9] on the home theater unit, press
the numbered button [3] on the remote control.
≥ AUTO OPERATION ON/OFF indicator lights green.
5 Turn off and on the additional wireless system.
[Note]
≥ If you should change the transmitter card, repeat the pairing
steps for both units of the wireless system.
≥
You cannot use the wireless system with SH-FX65T transmitter
card.

Use a pointed object.