Avermedia F200 Quick Manual page 11

Quick Instillation Guide
1. Open HomeFree Setup Tool and choose
Network Config. tab.
2. Select DHCP option.
3. Click Apply.
4. Then, click the Start button and choose
Control Panel.
5. Double-click on the Network Connections
icon .
6. Double-click on the Local Area Connection
icon (the main network connection you
are using).
7. Choose Properties.
8. Double-click on the Internet Protocol
(TCP/IP).
Select Obtain an IP address automatically.
9.
10. Click OK.
6 Using AVerTV 6
6.1 Activating the AVerTV 6 Application
Choose Start Programs
Note: For more AVerTV 6 instructions, please refer to the User's Manual in the Installation CD.
6.2 Uninstalling AVerTV 6 and HomeFree Setup Tool
Choose Start Programs
7 Using TFTP for Firmware Upgrade Recovery
Firmware upgrade may fail if upgrade is interrupted for any reason, such as when a power
blackout occurs during upgrading procedure. If so, you need the TFTP tool to restore the
firmware, so AVerMedia HD HomeFree Duet can function normally. To use TFTP, please do
the followings:
AVerMedia AVerTV 6
AVerMedia AVerTV 6
English-7
AVerTV 6.
Uninstaller Yes.