Connections - Panasonic TX65CR730E Operating Instructions Manual

2
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1 Put the screen protective cushion onto a work table.
2 Put the clean and soft cloth on the screen protective
cushion.
3 Put the TV onto the work table with the screen panel
down.
4 Remove the assembly screws
5 Pull out the pedestal from the TV.
8
English
A
A
from the TV.

Connections

External equipment and cables shown are not
supplied with this TV.
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
Check the terminal type and cable plugs are correct
for connection.
Use a fully wired HDMI compliant cable.
Use a fully wired SCART cable.
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
Please also read the manual of the equipment being
connected.
Terminals
1
2
8 9
1 CI slot (p. 11)
2 SD Card slot
3 Headphone jack (p. 11)
4 USB 1 - 3 port
5 HDMI3
6 AV1 (SCART) (p. 10)
7 AV2 (COMPONENT / VIDEO)
8 ETHERNET (p. 10)
3
4
5
6 7
10 11
(p. 11)