Panasonic KX-TGA914EX Operating Instructions Manual page 12

TGA914EX_1(e).book Page 12 Tuesday, August 8, 2006 2:21 PM
Camera Monitoring
Handset display item for camera
monitoring
Displayed Meaning
item
Example: The handset is connected
to the cordless camera.
8
When flashing:
The cordless camera is
paging the handset. (It
detects sound or its call
button is pressed.)
Paging the handsets from the
cordless camera
The cordless camera can page handsets
when it detects sound or by pressing its call
button. Then the answering handset user
can monitor live images from the cordless
camera.
Important:
L Only registered handsets can be paged
from the cordless camera. The base unit
cannot be paged.
L If a handset is paged by the cordless
camera during a call, 2 tones sound and
z flashes on the handset. To monitor the
cordless camera from the handset, press
{ih}, then press {s}.
L Auto intercom feature cannot be used
when paged by a cordless camera.
Paging using the camera audio sensor
Important:
L To use the audio detection feature of the
cordless camera, turn the audio detection
sensitivity to on (page 13).
1
Camera:
The camera detects sound.
L The camera produces a camera tone
and pages the handsets for 1 minute.
2
Handset:
12
Press {s} to answer the page.
L You can monitor the room where the
camera is located.
3
Handset:
To mute your sound output, press {C/T}
if necessary.
4
Handset:
When you finish monitoring, press
{ih} or place the handset on the base
unit or charger.
Paging using the cordless camera call
button
1
Cordless camera:
Press the call button.
L The cordless camera produces a
camera tone and pages the handsets
for 1 minute.
L To stop paging, press the call button
again.
2
Handset:
Press {s} to answer the page.
L You can monitor the room where the
cordless camera is located.
3
Cordless camera:
When the handset user answers, speak
clearly into the MIC.
4
Handset: