Table of Contents
Advertisement
TCA181E.fm Page 8 Wednesday, July 20, 2005 5:30 PM
Preparation
Registering the handset to KX-TCD820 base unit
Ensure that the handset is switched on. If it is not on, press and hold
for few seconds to turn the handset on.
{ih}
1
Lift the handset and press
2
Press and hold
on the base unit for about 3 seconds, until the
{x}
registration tone sounds.
3
Place the handset on the base unit. The registration tone continues to
sound. With the handset still on the base unit, wait until a confirmation
tone sounds and
stops flashing.
w
Note:
• If an error tone sounds, or if
manually. (See manual registration in the KX-TCD820 operating
instructions.)
• If all registered handsets start ringing in step 2, press
again from step 1.
• Charge the batteries for about 7 hours before initial use.
8
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
to put the handset in standby mode.
{ih}
is still flashing, register the handset
w
{x}
to stop. Start
Advertisement
Table of Contents
