HIKVISION DS-7108HGHI-E1 User Manual page 67

6. Optionally, you can click Copy to copy the settings to other analog channels if needed.
You can copy the same settings to the cameras with the same signal, e.g., the channel No. 1-3 connect to
the TVI cameras, and the channel No.4 connects to an analog camera, and then the settings of channel No.
1 can be only copied to channel 2 and 3.
7. Set encoding parameters for sub-stream.
1) Select the Substream tab.
2) Select a camera in the camera dropdown list.
3) Configure the parameters.
4) Click Apply to save the settings.
5) (Optional) If the parameters can also be used to other cameras, click Copy to copy the settings to other
channels.
Digital Video Recorder User Manual
Figure 5. 5 Copy Camera Settings
Figure 5. 6 Sub-stream Encoding
66