Samsung BD-P1000 User Manual page 44

TV Aspect
Setting up the Parental
Depending on the type of television you have, you may
want to adjust the screen setting. (aspect ratio)
Lock
• 4:3 Letter Box:
Select when you want to see the total 16:9 ratio
screen BD/DVD supplies, even though you have a
The Parental Lock function works in conjunction with
TV with a 4:3 ratio screen. Black bars will appear at
BD/DVDs that have been assigned a rating which helps the top and bottom of the screen.
you control the types of BD/DVDs that your family
• 4:3 Pan-Scan :
watches. There are up to 8 rating levels on a disc.
Select this for conventional size TV when you
want to see the central portion of the 16:9 screen.
(Extreme left and right side of movie picture will
be cut off.)
• 16:9 Wide :
With the unit in Stop mode, press the MENU You can view the full 16:9 picture on your
1
widescreen TV.
button.
Black Level
... ... † †
Press the
2
the ENTER or √ button.
Adjusts the screen brightness of the video signal.
• On : Select to increase the black level of the picture.
BD Player
BD
• Off : Select for the standard black level.
Music
Resolution
Photo
Sets the output resolution of the Component and HDMI
Setup
video signal.
MOVE
• Press the TV OUT SELECT button on the front panel
of the unit to select the HDMI mode, and then select
from 1080p, 1080i, 720p and 480p. Resolutions not
supported by your TV are unavailable. ... ... † †
3 Press the
press the ENTER or √ button.
• Press the TV OUT SELECT button on the front panel
of the unit to select the COMPONENT mode, and
When you operate your Blu-ray disc player for the
then select from 1080i, 720p, 480p and 480i.
first time, the "Enter New password" message will be
Resolutions are not supported by your TV are
displayed.
unavailable.
• Please refer to page 18 for more information on
BD Player
video output selection.
BD
• The number in 480i, 480p, 720p, 1080p and 1080i
indicates the number of lines of video. The i and p
Music
indicate interlace and progressive scan, respectively.
Photo
- 1080p : Outputs 1080 lines of progressive video.
- 1080i : Outputs 1080 lines of interlaced video. Setup
- 720p : Outputs 720 lines of progressive video.
MOVE
- 480p : Outputs 480 lines progressive video.
- 480i : Outputs 480 lines of interlaced video. 480i
Enter the 4-digit password using the number buttons resolution is not available for HDMI output.
4
on the remote control.
The "Confirm the password" message will be
displayed. Enter your password again.
Blu-ray Disc playback is available with only
s
HD mode (720p, 1080i and 1080p)
NOTE
BD Player
BD
Music
Photo
Setup
MOVE
44 - English
Downloaded From DvDPlayer-Manual.com Samsung Manuals Downloaded From DvDPlayer-Manual.com Samsung Manuals
buttons to select Setup, then press
Setup
Language Setup
√ √ √ √
Title
Audio Setup
√ √
Display Setup
√ √
Parental Setup
√ √
A Memory Card
SELECT RETURN EXIT
buttons to select Parental Setup, then
Parental Setup
Title
Enter New password
A Memory Card
SELECT RETURN EXIT
Parental Setup
Title
Confirm the password
A Memory Card
SELECT RETURN EXIT
Resolution output according to disc type
Press the ENTER or √ button to select Use Password.
5
In HDMI mode
BD playback : 1080p, 1080i, 720p are available.
BD Player
DVD playback : 1080p, 1080i, 720p and 480p are all
BD
available.
Use password
Title
However, resolutions not supported by the TV are
Rating Level
New Password
Music
unavailable.
Photo
In COMPONENT mode
Setup
A Memory Card
• BD playback
MOVE SELECT
Manufacturers of Blu-ray Discs may restrict access to
certain video outputs and resolutions. These constraints
are referred to as "Tokens". There are three different
levels of permission possible, they are:
... ... † †
6 Press the buttons to select On or Off, then press
- Token Disable : 1080p, 1080i, 720p are available.
the ENTER button.
- ICT Enable or DOT Enable : Component and all
analog outputs are disabled in this token.
HDMI must be connected to view a disc with this
token.
Press the RETURN or œ button to return to
s
• DVD playback
the previous menu.
Only 480p and 480i are available. (1080i and 720p will
NOTE
be outputted as 480p even if selected.)
Press the MENU button to exit the menu.
In VIDEO (S-VIDEO) mode
BD playback is not available in this mode.
DVD playback: Cannot change resolution in VIDEO mode
and only 480i output is available.
If you forgot your password
HDMI mode
Discs
(HDMI output)
1 Remove the disc.
Blu-ray Disc
Blu-ray Disc with
ICT(Image
1080p, 1080i,
Constraint Token)
720p
2 Press and hold the
Blu-ray Disc with
5 seconds or more.
DOT(Digital Only
• All settings will revert to the factory settings.
Token)
1080p, 1080i,
DVD
720p, 480p
HDMI Format
You can choose from TV or Monitor for HDMI output.
• TV : Select if HDMI output is connected to the TV.
• Monitor : Select if HDMI output is connected to the
Monitor.
If the player is connected to a TV, the Monitor option
is unavailable.
Screen Message
• On : Displays messages related to operation mode.
• Off : Does not display messages related to operation
mode.
Front Display
• Automatic : Display is dark during playback and
bright when the unit is in Stop mode.
• Dim : Select to dim the display window.
• Bright : Select to brighten the display window.
Parental Setup
: Off
√ √ √ √
: 8 (Adults)
√ √
√ √
RETURN EXIT
Component mode Video mode(S-Video,
(Component output) Video output)
1080i, 720p No picture
No picture No picture
button on the front panel for
No picture No picture
480p, 480i 480i
English - 43