Setting Up The Speaker Options - Samsung BD-P1000 User Manual

... ... † †
4 Press the
option from the options described below, then press
the ENTER or √ button.
... ... † †
Press the
5
then press the ENTER button.
Press the RETURN or œ button to return
s
to the previous menu.
NOTE
Press the MENU button to exit the menu.
Digital Output
• PCM : Select this when your equipment does not
decode Dolby Digital.
• Bitstream : Outputs Dolby Digital or MPEG-2 or DTS
audio as bitstream. Select this when your
AV receiver or AV amplifier has a Dolby
Digital or MPEG-2 or DTS Decoder.
LPCM sound track is always outputted as PCM.
s
Be sure to select the correct Digital Output or
s
NOTE
you will hear no sound or a loud noise.
When playing a Dolby Digital movie make sure
s
the Digital Output is set to Bitstream.
If you have the unit connected via the 5.1
s
channel analog outputs and play a DVD Dolby
Digital disc, sound will only be heard from the
Front Left and Right speakers.
If you have the unit connected via any analog
s
output and play a DTS DVD disc, no sound
will be heard. To hear sound, the digital output
must be connected and set to Bitstream.
PCM Down Sampling
• On : Select this when the Amplifier connected to the
player is not 96KHz compatible.
In this case, the 96KHz signals will be down
converted to 48KHz
• Off : Select this when the Amplifier connected to the
player is 96KHz compatible. In this case, all
signals will be output without any changes.
Even when PCM Down Sampling is set to Off,
s
some discs will only output downsampled
NOTE audio though the digital outputs.
HDMI
• If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS, MPEG), you
should set Digital Audio to PCM.
• If your TV is not compatible with LPCM sampling rates
over 48kHz, you should set PCM Down Sampling to On.
Downloaded From DvDPlayer-Manual.com Samsung Manuals
buttons to select the desired audio
buttons to select the desired item,
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
• Off : You can enjoy the movie with the standard
Dynamic Range.
• On : When Movie soundtracks are played at
low volume or from smaller speakers, the
system can apply appropriate
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.
Setting up the Speaker
Options
With the unit in Stop mode, press the MENU
1
button.
... ... † †
2 Press the buttons to select Setup, then press
the ENTER or √ button.
BD Player
BD
Language Setup
Title
Audio Setup
Display Setup
Music
Parental Setup
Photo
Setup
A Memory Card
MOVE SELECT
... ... † †
Press the buttons to select Audio Setup, then
3
press the ENTER or √ button.
BD Player
BD
Digital Output
Title
PCM Down Sampling : On
Music
Dynamic Compression : On
Speaker Setup
Photo
Setup
A
Memory Card
MOVE SELECT
... ... † †
4 Press the buttons to select Speaker Setup,
then press the ENTER or √ button.
BD Player
BD
L
Small
LFE
LS
Small
A Test Tone
MOVE SELECT
Setup
√ √ √ √
√ √
√ √
√ √
RETURN EXIT
Audio Setup
: PCM
√ √
√ √
√ √
√ √
√ √
RETURN EXIT
Speaker Setup
R
C
Small
Small
RS
Small
RETURN EXIT
English - 41