Nortel WLAN Access Port 223x Quick Installation Manual page 12

12 Industry Canada Required User Information for WLAN — Access Ports 223x
Industry Canada Required User Information for WLAN — Access
Ports 223x
This device has been designed to operate with antennae having maximum gains of 7.8 dBi (2.4 GHz) and 7.4 dBi
(5 GHz).
Antennae having higher gains is strictly prohibited per regulations of Industry Canada. The required antenna impedance
is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equiva-
lent isotropically radiated power (EIRP) is not more than that required for successful communication.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
To ensure compliance with EMC standards applied to the Nortel Networks WLAN — Wireless Security Switches
(2270), shielded twisted pair (STP) 10/100Base-T cabling must be used.
216394-B Rev 00