Panasonic TH-37PH9UK Operating Instructions Manual page 42

Options Adjustments
Item Effect
Initial VOL
level
Off On
Maximum VOL
level
Off On
INPUT lock
Studio W/B
Off On
Advanced PIP
Off On
Display size
Off On
42
Press button to adjust the volume when TV is turned on.
Off On
Off: Sets normal volume.
On: Sets your preferred volume.
Notes:
• When "Maximum VOL level" is "On", the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu if you
adjust the volume when "Initial VOL level" is "On" and cursor is on the menu.
Press button to adjust the maximum volume.
Off On
Off: Sets auto maximum volume.
On: Sets your preferred maximum volume.
Notes:
• If the "Maximum VOL level" is set lower than the "Initial VOL level", the "Initial VOL level" automatically
becomes the same as the "Maximum VOL level".
• The volume display can go up to 63 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu if you
adjust the volume when "Maximum VOL level" is "On" and cursor is on the menu.
Off PC INPUT1
Locks the input switch operation.
Notes:
• Only the adjusted signal is displayed (see page 18).
• Signal can be displayed when the Terminal board is installed.
• Input switch can be used when this is set to "Off".
• In two screen display mode, if anything other than "Off" is set, the value will be fi xed as the value input
in the single screen display mode.
Off: Nullify all the settings adjusted.
On: Sets the color temperature for TV studio.
Note: Valid only when the low is set as color temperature on screen adjustment.
Off: Sets normal two screen display mode (see page 21).
On: Sets Advanced PIP mode (see page 22).
Notes:
• When "INPUT lock" is "On", you cannot use all the two screen display functions.
• , buttons are unavailable during Advanced PIP mode operation.
Adjusts the image display size on screen.
Off: Sets the normal image display size on screen.
On: Sets the image display size approximately 95 % of the normal image display.
Off
Notes:
• This setting is valid only when the input signals are as follows; 525i, 525p, 625i, 625p, 750/60p,
750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, 1125/30p, 1250/50i (Component Video,
RGB, DVI, SDI, HDMI)
• This setting is invalid when two screen display, digital zoom or Multi screen is selected.
• When Display size is set to "On", Pos. /Size adjustment cannot be used.
• Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.
Adjustments
INPUT2 INPUT3
On
Options
Enable
Off-timer function
Onscreen display On
Initial INPUT
Off
Off
Initial VOL level
Maximum VOL level Off
INPUT lock Off
Studio W/B Off
Advanced PIP Off
Display size Off
1/3
0
0