General Information; Technical Data About This Product - Panasonic VL-GM001 Installation And Operation Manual

General Information

Technical data about this product

Sub Monitor station
Power supply:
Current consumption:
Dimensions:
Mass (Weight):
Operating environment:
Installation method:
External material:
Note:
• To connect to a chime, make sure the chime is:
– Normal open (Low active)
– Less than 30 V AC (1 A), 24 V DC (1 A)
AC adaptor (Part number: PFAP1014)
Power supply:
Output voltage:
Output current:
Dimensions:
Mass (Weight):
Operating environment:
Note:
• Design and specifications are subject to change without notice.
• The pictures and illustrations in these instructions may vary slightly from the
actual product.
18
24 V DC
Standby: Approximately 38 mA
At operation: Approximately 210 mA
Approximately height 145 mm x width 165 mm x depth 44 mm
" x 6 " x 1
3 1 3
/ / /
(5
4 2
Approximately 600 g (1.32 lb.)
0 °C to 40 °C (32 °F to 104 °F), Up to 90 % RH
(Relative Humidity) non condensing
Exposure mount
Flush mount (Optional Flush mount unit is required.)
Flame retardant ABS resin (panel: acrylic resin)
100 V – 240 V AC , 50 Hz / 60 Hz
24 V DC
2 A
Approximately height 120 mm x width 60 mm x depth 35 mm
" x 2 " x 1
3 3 3
/ / /
(4
4 8
Approximately 310 g (0.68 lb.)
0 °C to 40 °C (32 °F to 104 °F), Up to 90 % RH
(Relative Humidity) non condensing
")
4
")
8