Table of Contents
Advertisement
HOW TO USE "MAIN MENU"
ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS
1. APERTURE CONTROL
Compensates the frequency
characteristics of the input
video signal. Press the
button to display the setting
menu illustrated on the right.
NOTE : APERTURE
CONTROL is not
displayed when the
RGB signal is input.
Item
: LEVEL
Adjustment
range
: 00 ~ +10
Function
: Adjusts the compensate value. The higher the
number is, the larger the compensate value gets.
Item
: CONTROL FREQ.
Settings
: HIGH/LOW/OFF
Function
: Adjusts the frequency compensation.
HIGH : Compensates the high frequencies.
LOW : Compensates the low frequencies.
OFF : Deactivates the aperture compensation.
Item
: sub menu
Adjustment range/
Settings
: Same as LEVEL or CONTROL FREQ.
Function
: Performs the LEVEL or CONTROL FREQ.
settings in a single-line display. The display
position depends on the "sub menu POSITION"
setting.
Item
: reset
Function
: Sets the LEVEL and CONTROL FREQ. values to
factory-preset ones.
2. SLOT CONDITION
Displays the status of the input
cards installed in each of the
input card slots. Press the
button to display the setting
menu illustrated on the right.
Items
: INPUT A:/INPUT B:/INPUT C:/INPUT D:/INPUT
E:/INPUT F:
Settings
: VIDEO-1/VIDEO-2/COMPO./RGB/SDI 1/SDI 2/
HD SDI 1/HD SDI 2/HD SDI 1
SLOT
Function
: Displays the status of the input cards installed in
each of the input card slots.
● INPUT A/B corresponds to SLOT 1, INPUT C/D to SLOT 2,
and INPUT E/F to SLOT 3.
● VIDEO-1 or VIDEO-2 shows the video input card is installed.
COMPO. or RGB shows the component/RGB input card.
SDI 1 or SDI 2 shows the SDI input card is installed.
12
HD SDI 1 or HD SDI 2 shows the HD SDI input card is
installed.
HD SDI 1
(compatible with EMBEDDED AUDIO) is installed.
● NO SLOT shows no input cards are installed.
3. sub menu POSITION
Items
Settings
Functions : UPPER : An adjustment item is displayed on the
4. AREA MARKER
Items
Settings
Functions : OFF: The marker is not displayed.
● AREA MARKER is displayed when the displayed picture is
such a format as 1080i/1035i/720p etc. or has been
converted to 16:9 ratio by pressing the ASPECT button.
● To actually display the marker, the AREA MARKER button
on the monitor needs to be pressed so that it is
illuminated.
/HD SDI 2
/NO
*
*
(cont'd)
and HD SDI 2
show the HD SDI input card
*
*
: Selects the display position of the sub menu
superimposed on the screen.
: UPPER/LOWER
top of the screen.
LOWER : An adjustment item is displayed on the
bottom of the screen.
: Selects the size marker for the other screen ratio
(aspect) used when the screen ratio is 16:9.
: OFF/16:9/4:3/13:9/14:9/MODE 1/MODE 2
16:9/4:3/13:9/14:9: Displays the marker (a white
quadrangle) showing the screen size of each
aspect ratio.
MODE 1/MODE 2: Displays no markers because
these settings will be used for function expansion
in the future.
16:9
14:9
4:3
13:9
Advertisement
Table of Contents
