Siemens S7-1200 Operating Instructions Manual page 103

"PIN"
In STEP 7, the PIN can be found in the parameter area "Mobile wireless communications
settings" > "Services and settings".
Table 5- 7 IF_CONF_PIN
Parameter
Id
Length
Mode
Pin
"Authorized phone number"
In STEP 7, the corresponding data is located in the "Security" parameter area.
Table 5- 8 IF_CONF_WakeupList
Parameter
Id
Length
Mode
WakeupPhone [1...10]
CP 1243-7 LTE
Operating Instructions, 01/2015, C79000-G8976-C381-01
Data type Initial value
UINT 11
UINT
UINT
STRING [8]
Data type Initial value
UINT 13
UINT
UINT
ARRAY [1...10]
of STRING [22]
Programming the program blocks
5.4 IF_CONF: SDT for the configuration data of the CP
Description
ID of the parameter field
Length of the parameter field in bytes: 16
Validity (1, 2) - see above (general parameters)
PIN of the SIM card inserted in the SIM card
The parameter is not relevant if the PIN was correctly
configured. If the PIN was incorrectly configured, the
correct PIN can be entered.
Description
ID of the parameter field
Length of the parameter field in bytes: 246
Validity (1, 2) - see above (general parameters)
Phone number subscriber authorized to wake up
The asterisk (*) at the end of a call number is used a
placeholder for direct dialing numbers.
103