Buick 2009 Enclave Owner's Manual page 221

Using the Delete All Name Tags
Command
The delete all name tags command
deletes all stored phone book name
tags and route name tags for OnStar
(if present).
To use the delete all name tags
command:
b g
1. Press and hold
two seconds. The system
responds with "Ready"
followed by a tone.
2. Say "Delete all name tags".
The system responds with "You
are about to delete all name tags
stored in your phone directory
and your route destination
directory. Are you sure you want
to do this? Please say yes or no."
•
Say "Yes" to delete all
name tags.
•
Say "No" to cancel the function
and return to the main menu.
Making a Call
Calls can be made using the
following commands:
•
Dial
•
Digit Dial
•
Call
•
Re-dial
for
Using the Dial Command
1. Press and hold
two seconds. The system
responds with "Ready"
followed by a tone.
2. Say "Dial". The system responds
with "Dial using <phone name>.
"Number please" followed by
a tone.
3. Say the entire number without
pausing.
•
If the system recognizes the
number, it responds with
"OK, Dialing" and dials
the number.
Instrument Panel
Using the Digit Dial Command
b g
for
1. Press and hold
2. Say "Digit Dial". The system
3. Say the digit to be dialed one at
•
If the system does not
recognize the number, it
confirms the numbers followed
by a tone. If the number is
correct, say "Yes". The system
responds with "OK, Dialing"
and dials the number. If the
number is not correct, say
"No". The system will ask for
the number to be re-entered.
b g
for
two seconds. The system
responds with "Ready"
followed by a tone.
responds with "Digit dial using
<phone name>, please say the
first digit to dial" followed by
a tone.
a time. Following each digit, the
system will repeat back the digit it
heard followed by a tone.
3-103