Panasonic
MECA TDC
I
NSTALL
MPU955 Time Management Utility
CHANGING MAIN CPU
To change the TMU Date/Time settings to match the PC, perform the
following steps:
1. Verify the PC Date and Time settings.
See Verify Local PC Settings section on page 13.
2. Click the "Set to Local PC Date/Time Settings" button.
3. Verify the Date and Time settings match the PC
settings.
4. Proceed to transfer the settings to the system CPU(s),
see "Transfer Settings" below.
To manually change the CPU date and time settings, perform the
following steps:
1. Click the desired date on the calendar.
The selected date will be highlighted in gray.
2. Click on the CPU Time clock hour.
3. Adjust by clicking the up or down arrows to advance
the hour by increments of one.
•
Tip: You may highlight a time section and type in the desired
hour.
4. Adjust the minutes, seconds and AM/PM in the same
manner.
5. Proceed to transfer the settings to the system CPU(s),
see "Transfer Settings" below.
Set Date/Time
Quick Set
Manual
I
NSTALL
17