Table of Contents
Advertisement
Installation instructions
1. Unscrew two bolts (A) and remove GFCI cover
(B) located on the front base of the dishwasher
inside the cabinet.
2. Make sure that indicator (D) is in "1" position.
3. Turn on dishwasher if it is off – press main
switch (C) to "on" position (LED's are lighting).
4. Press TEST button (E). Indicator should switch
into "0" position. If it does not dishwasher can
not be used – contact service immediately.
5. Switch back indicator into "1" position.
6. Place GFCI cover and screw down two bolts.
Check operation
• Refer to the "Instruction For Use" booklet that
came with this dishwasher and run the
dishwasher through a complete cycle.
• Check for leaks.
9
Advertisement
Table of Contents
