Page 1
30e, 40e, 50e, 60e, & 80e USERS INSTRUCTIONS IT IS IMPORTANT THAT THE CASE OF THIS APPLIANCE IS NOT REMOVED FOR ANY REASON OTHER THAN FOR SERVICING BY A QUALIFIED SERVICE ENGINEER. THE APPLIANCE MUST NOT BE OPERATED WITHOUT THE CASING CORRECTLY FITTED AND FORMING AN ADEQUATE SEAL.
Page 2
OTHER CONTROLS The information given on this card will help you to obtain the A Potterton Electronic Programmer or other type of clock may maximum comfort from your boiler with the minimum trouble and have been fitted in your system, together with room and/or cylinder cost.
Page 3
Check that all the thermostats in the system are not on low settings. Overheat Limit Thermostat The boiler is fitted with a safety thermostat to protect against overheating of the water. Should the boiler fail to light, allow it to cool and press the reset button. Access to the button is through a hole in the underside of the controls cover, see illustration on front page.
Page 4
It is important to include details of your installer annually for safety and to have routine maintenance. This (if known) and to return the completed form to the Potterton should be carried out by a CORGI Registered Registration Department.
This manual is also suitable for:
40eProfile 80eProfile 60eProfile 50eProfile 40eProfile 30e...
Show all
Need help?
Do you have a question about the 30e and is the answer not in the manual?
Questions and answers