The t.racks DS 2/4 User Manual page 23

"delay time/distance"
"interface"
"name"
"source"
"parameter" menu
The "delay time/distance" menu item can be used to set the runtime delay of the digital
speaker management system. Available units are meter (m), feet (ft) and milliseconds (ms).
Confirm your selection with [ENTER].
The "interface" menu item can be used to determine the transfer sped of the RS232 interface
(2400, 4800, 9600, 19200 or 38400 Bd) and the device ID (Remote-ID 1 to 32) of the digital
speaker management system. Confirm your selection with [ENTER].
The"name" menu item can be used to assign designations from the present list to the outputs.
Select the desired designation with the jog wheel and confirm your selection with [ENTER].
The "source" menu item can be used to verify assignment of the inputs A and B. Changes are
not possible in this place.
In the "parameter" menu, different device parameters can be adjusted. Open the menu with
[GAIN], select the desired option with the [BACK] and [NEXT] buttons and confirm the selection
with [ENTER]. The access lock can be revoked by input of a valid password.
DS 2/4
Functions
23