The t.racks DS 2/4 User Manual page 21

"erase a Xover"
"security sub menu"
Use this submenu to delete configurations stored in the device.
1. Operate the [ENTER] button and then three times the [NEXT] button to activate the
"erase a Xover" option. The display shows '... erase a xover' .
2.
Operate the [ENTER] button and select the memory slot of the configuration you want to
delete with the jog wheel (1 to 10). The display shows the safety prompt 'erase xover
memory?' .
3. Confirm with [ENTER] to delete the configuration.
The "security sub menu" can specify the access rights for different device parameters to pre‐
vent undesired or unauthorised changes. The following options are available:
change only (read access to the parameters, MUTE function available)
n
change + view (no access to parameters, MUTE function available)
n
change + mute (read access to the parameters, MUTE function not available)
n
n everything (no access to parameters, MUTE function not available)
Select the desired option with the [BACK] and [NEXT] buttons or the jog wheel and confirm the
selection with [ENTER]. The access lock can be revoked by input of a valid password.
DS 2/4
Functions
21