MANUFACTURED BY ROBAND AUSTRALIA PTY LTD OPERATING INSTRUCTIONS COFFEE WARMER UNIT Model: KH2 Version 3 units Special Features: Easy to use operation Dual & simultaneous heating of coffee jugs Space efficient design...
Page 2
Roband Australia also acts as the Australian agents for Vitamix ® Blenders, NOAW Meat Slicers and RYNO Stainless Benching. In addition to a vast range of machines, Roband Australia has its own ® line of commercial cookware and cutlery under the Robinox brand name.
Always be careful when near an operating coffee warmer, and ensure that any risk to unwary customers or staff is minimised with additional signage if necessary. Due to the obvious heat hazard Roband recommends that these units be kept out of reach of children.
PACKAGING All care is taken when packing and Roband ensures that every unit is functional and undamaged at the time of packaging. The Package of this Coffee Warmer Unit should include: One Coffee Warmer Unit (appropriate model) This Manual Packaging Materials...
INSTALLATION Remove all the packaging materials and tape, as well as any protective plastic from the machine. Clean off any glue residue left over from the protective plastic. Place the Coffee Warmer Unit on a firm, level surface in the required position.
OPERATION The two green rocker switches on the left and right side of the front activate the coffee warmer unit. Each switch controls the heating of one of the warming plates. When the on position is selected the switch will glow and the element will heat up.
SAFETY GENERAL SAFETY This machine contains no user-serviceable parts. Roband Australia, one of our agents, or a similarly qualified person(s) should carry out any and all repairs. Any repair person(s) should be instructed to read the Safety warnings within this manual before commencing work on these units.
CLEANING, CARE & MAINTENANCE Attention to regular care and maintenance will ensure long and trouble free operation of your coffee warmer. Although scheduled servicing is not required we do recommend you adopt a program of regular maintenance to ensure that the hot plate is clean and functional and to avoid inadvertently damaging the unit.
TROUBLESHOOTING If the coffee warmer does not heat up check the following points before calling for service. The unit is plugged in correctly and the power is switched on. The power point is not faulty. The rocker switch is not loose or broken, rendering the switch inoperable.
SPECIFICATIONS Power Power Width Depth Height Weight Model Source Rating 220 - 230 - 250 240Volts Watts Constant research and development may necessitate specification changes at any time. Page 11...
CIRCUIT DIAGRAM* Model: KH2 * This circuit diagram has been provided for reference and to assist qualified service and repair agents only. Under no circumstances should person’s not suitably qualified attempt repairs to any electrical equipment. Page 12...
If you are unable to locate a circuit without an RCD please contact your supplier, or if you prefer you can contact Roband and send the unit to one of our offices where we can run the machine on a suitable circuit free of...
Under no circumstances shall Roband Australia Pty Ltd or any subsidiary company or Agent be liable for loss of profit or damage to other equipment and property.
Page 16
ALSO AVAILABLE FROM YOUR ROBAND DISTRIBUTOR NOAW SLICERS STEAMER ROBINOX KITCHEN &TABLEWARE TWIN DRINK VERTICAL TOASTER HIGH SPEED CONTACT GRILL MIXER ECO-RAY AUTOMATIC HOT WATER URNS VITA-MIX BLENDERS TOASTERS AND GRILLERS Manufactured/Imported in Australia by ROBAND AUSTRALIA PTY LTD Authorised Distributor/Agent...
Need help?
Do you have a question about the KH2 and is the answer not in the manual?
Questions and answers