Table of Contents
Advertisement
Using the Private Handsfree Headset
When the Private Handsfree Headset is plugged into the phone, you can
have a phone conversation without holding the phone to your ear. The
other person's voice is heard through the Private Handsfree Headset's
earpiece. When you speak, your voice is picked up by the Private
Handsfree Headset's microphone.
Note: Before attaching the Private Handsfree Headset, remove
the plug from the headset/TTY connector at the bottom left side
of your phone. Store the plug in a safe place so you will be able
to cover the connector when necessary.
Attach the Private Handsfree Headset to your phone as shown.
1
Securely plug the Private Handsfree Headset connector into the side of
the phone. This will automatically disable the speaker and microphone
in the phone.
Attach the Private Handsfree Headset clip to your clothes.
2
3
Insert the earpiece into your ear.
4
During conversation, increase or decrease volume to a comfortable
level by pressing
or
5
The microphone picks up your voice from its hanging position.
Note: Once the Private Handsfree Headset is connected, you
can customize the ring volume, key volume, and voice volume
settings for handsfree use. Ring volume and key volume can be
changed in the Tone Settings menu. Voice volume can be
customized during conversation as indicated above. When you
disconnect the Private Handsfree Headset, your phone will go
back to the settings programmed for standard handheld use.
Caution: The use of an ear insert device while driving may
violate the laws of some states/provinces. Be sure to check
applicable state/provincial laws before using this device.
on the phone's center navigation key.
Chapter 2
Getting Started
15
Advertisement
Table of Contents
