Remote Controller Specifications; Function Buttons - Climadiff CLIMA18 User Manual

CAUTIONS
Do not mix old and new batteries or batteries of a different type.
Do not leave the batteries in the remote controller if it is not going
to be used for 2 or 3 months.
Dispose of the old batteries in the special containers to be found
Dispose of the old batteries in the special containers to
in the sales outlets.
be found in the sales outlets

Remote Controller Specifications

RG51B1/(C)EU, RG51B14/(C)E,RG51B31/(C)E
RG51B/(C)EU, RG51B16/(C)E,RG51B31/(C)EU
Model
RG51B17/(C)EU, RG51B18/(C)E,RG51B32/(C)E
RG51B19/(C)E-M, RG51B20/(C)E,RG51B30/(C)EU
RG51B25/(C)E, RG51B26/(C)EU;RG51B27/(C)E,
RG51B30/(C)E,RG51B30/(C)EF
Rated Voltage 3.0V(Dry batteries R03/LR03×2)
Lowest Voltage of
2.0V
CPU Emitting Signal
Signal Receiving
8m
Range
。
-5 C ~ 60 C( -41 F~140 F )
-5 C° ~ 60°C ( -41° F~140°F )
Environment
Celsius scale( C):
RG51B14/(C)E, RG51B16/(C)E,RG51B18/(C)E,RG51B31/(C)E,RG51B19/(C)E-M,
RG51B20/(C)E,RG51B25/(C)E,RG51B27/(C)E,RG51B30/(C)E,RG51B32/(C)E,
RG51B30/(C)EF.
Fahrenheit scale( F): RG51B/(C)EU, RG51B1/(C)EU, RG51B17/(C)EU,RG51B26/(C)EU,
RG51B30/(C)EU,RG51B31/(C)EU.
Performance Feature
1. Operating Mode: AUTO, COOL, DRY, HEAT (Cooling only
model without), and FAN.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 17 C~30 C(62 F~88 F).
3. Indoor Setting Temperature Range: 17°C~30°C (62°F~88°F).
4. Full function of LCD (Liquid Crystal Display)
4. Full function of LCD (Liquid Crystal Display)
NOTE:
All the illustrations in this manual are for explanation purpose only.
Your air conditioner may be slightly different.The actual shape shall
prevail.
。 O O
。 。 O O
3
TEMP DOWN Button
1

Function buttons

Push this button to decrease the indoor temper-
SET TEMPERATURE( C)
ature setting in 1 ature setting in 1
AUTO FAN
COOL HIGH
DRY MED
HEAT LOW
TEMP UP Button
2
TEMP
2
Push this button to increase the indoor temper-
1
6
ature setting in 1
MODE ON/OFF FAN SPEED
7
3
SWING ECONOMY TIMER ON
4 8
9 3 MODE Button
TIMER OFF
RESET LOCK
5
10
LE D Each time the button is pressed, the operation
DISPLAY
11
mode is selected in the sequence of the following:
12
AUTO
Model: RG51B14/(C)E,RG51B16/(C)E,
RG51B18/(C)E,RG51B19/(C)E-M,
NOTE: Do not select HEAT mode if the machine you
RG51B20/(C)E,RG51B31/(C)E
purchased is cooling only type. Heat mode is not
RG51B30/(C)E,RG51B32/(C)E
supported by the cooling only appliance.
NOTE:
SWING Button(on some models)
4
RG51B16/(C)E ,RG51B18/(C)E
Used to stop or start louver movement and
models have no SWING feature;
set the desired up/down airflow direction.
RG51B18/(C)E ,RG51B19/(C)E-M,
RG51B20/(C)E models have no
5 RESET Button
LED DISPLAY feature.
RG51B19/(C)E-M model has no
Once the recessed RESET button is pressed,
MED FAN feature.
all of the current settings will be cancelled
RG51B31/(C)E model ECONOMY button
and the controller will return to the initial settings.
is instead of SLEEP button.
RG51B30/(C)E model has no
6
ON/OFF Button
MED FAN and SWING features.
Operation starts when this button is pressed
RG51B32/(C)E model has no MED FAN,
and stops when the button is pressed again.
SWING and ECONOMY features.
SET TEMPERATURE( C)
AUTO
7 FAN SPEED Button
COOL FAN
DRY HIGH
Used to select the fan speed in four steps:
HEAT MED
LOW
TEMP
2
1
Some models have no MED FAN feature.
6 Some models have no MED FAN feature
MODE ON/OFF FAN SPEED
7
3
SWING ECONOMY TIMER ON
8
8
4 TIMER ON Button TIMER ON Button
9
TIMER OFF Press this button to activate the Auto-on time
RESET LOCK
ION
10
14
LED
FOLLOW
setting. Each press will increase the time setting
DISPLAY
ME 11
5
12
in 30 minutes increments, up to 10 hours, then at
13
1 hour increments up to 24 hours. To cancel the
Model: RG51B25/(C)E;RG51B27/(C)E
Auto-on time setting, just press the button until
RG51B30/(C)EF
NOTE:
the time setting is 0.0.
RG51B25/(C)E model has no SWING
9
ECONOMY(SLEEP) Button
and FOLLOW ME features.
RG51B27/(C)E model has no FOLLOW ME Select this function during the sleeping time. It
feature.
can maintain the most comfortable temperature
RG51B30/(C)EF model has no SWING and
and save energy. This function is available on
ION features,ECONOMY button is instead
COOL, HEAT or AUTO mode only.
of SLEEP button
o o
o o
C(2 F) increments to 30 C(2 F) increments to 30 C(88 F). C(88 F).
o o
C(2 F) increments to 17 C(62 F).
COOL DRY HEAT FAN
Auto Low Med High
4