Page 1
An Advanced Programmable GSM 3G Senior Helper Multifunctional GSM 3G Telecare Telecare&Telehealth GSM 3G Telehealth In The Worldwide! User Manual Ver 1.2 Date Issued: 2015-06-25 All rights reserved. King Pigeon Communication Co., Ltd.
General SMS Command List SMS COMMAND Functions & Actions To arm the T3, in this mode, any detector triggered will alarm. To disarm the T3, in this mode, detector triggered will not alarm. To switch ON the Siren output. To switch OFF the Siren output Inquiry the T3 Status and GSM Module IMEI Code.
The GSM 3G Senior Helper T3 can be used as a telecare system, it can report the elderly daily actions. Includes elderly away/back home time, remind to take medicine, go to sleep and get up time, when not get up in time at morning then T3 will generate alarm over GSM or GPRS or dial the preset numbers.
Page 4
T3 --- GSM 3G Senior Telecare ---GSM 3G Elderly Care Alarm System 1.1 Features: Brevity, Fashion, Neat design; Fashion hand free design, large keyboard; Large LCD display current time, temperature, and alarm types; GSM SMS/GPRS/3G Transmission, no distance limitation;...
All wireless equipment might interfere network signals of T3 and influence its performance. Avoid Use at Gas Station Do not use T3 at a gas station. Power off T3 when it near fuels or chemicals. Power it off near Blasting Places Please follow relevant restrictive regulations.
Page 6
T3 --- GSM 3G Senior Telecare ---GSM 3G Elderly Care Alarm System LCD Display Back side SIM Card slot &Power switch cover Temperature sensor Microphone Power in Siren output Micro USB USB for external for configuration device (reserve) Page 6 of 18 Ver 1.2...
T3 --- GSM 3G Senior Telecare ---GSM 3G Elderly Care Alarm System 4. Installation and Setting y PC software: Open the unit's back side cover and insert the SIM card. Connect the unit's power supply, ,siren(if needed),and USB cable to PC.
Page 8
SIM Card & Alarm numbers The T3’s SIM Card number is important. If you can’t receive the alert SMS or correct time from T3, please change the country code format, for example: use 0086 instead of +86 or 86. Refer to the Alarm number settings.
Page 9
T3 --- GSM 3G Senior Telecare ---GSM 3G Elderly Care Alarm System Fast dial numbers GPRS data & E-mail E-mail address for receiving data. E-mail account for sending data. Server IP and Port for receive the data. Call your mobile operator if you don’t know the APN and user name/password.
Page 10
24hours:emergency zone with sounds. In any mode if triggered will cause alarm immediately. Backhome: trigger the sensor in this zone will make T3 change to Stay Mode. Monitoring: Watchdog zone type, when sensor in this zone hasn’t be triggered during the “start-end” time, will send alert SMS.
Page 11
Save the settings as .bin format, send the .bin profile to us if you need technical support for the configuration. Load Profile: Import .bin profile, this is very useful for a number of T3 with similar settings. Save Profile as: Export the parameter settings as .bin format to the PC.
Page 12
T3 --- GSM 3G Senior Telecare ---GSM 3G Elderly Care Alarm System Save Settings Save the settings to T3. RESET(Caution to click) Caution: Click this will be RESET parameters as factory mode! All of your settings will lost. Page 12 of 18 Ver 1.2...
Page 13
Arm record: Read the arm records from T3 to the PC software. Incoming record: Read the incoming call records from T3 to the PC software. Dial Out record: Read the dial out records from T3 to the PC software. Inbox: Read the inbox SMS. ...
Page 14
T3 --- GSM 3G Senior Telecare ---GSM 3G Elderly Care Alarm System 5. Setting & Operation y SMS commands: Quick operation & Inquiry (1234--default password, change it to your new password if modified) S.N. Function Description SMS Command Format Example...
(“d”—sensor added on this zone already) After step ④, press Delete wireless sensor: more than 2 seconds. , or T3 will exit “add wireless sensors” mode automatically if no action more than 2 Exit: press minutes. Page 15 of 18 Ver 1.2...
24hours safety guard When smoke, gas, CO or water flood detected,T3 will make audible alarm, send alert SMS text and call to the receivers/CMS. 24hours house security alarm status,T3 make audible alarm and send alert SMS text & call when intrusion sensor triggered.
Page 17
Connect the cuff to T3 unit, make the connection tightly: If the measurement error, T3 unit make two di di sound, LCD will display E1 or S1 and the LED beneath the button will keep red light, then please do it again.
T3 sends alert SMS text to receivers when temperature higher/lower than threshold more than 10mins. Other care T3 will send alert SMS text when AC/DC power lost and recovery immediately, back up battery low power, wireless sensor’s battery low power(if have).
Need help?
Do you have a question about the T3 and is the answer not in the manual?
Questions and answers