Setting The Time; Convenient Functions; Turning The Demo Function Off - Panasonic SC-PM10 Operating Instructions Manual

MUTING

Setting the time

A
by remote control only
This is a 24-hour clock.
The example shows how to set the clock for 18:30 (6:30 pm).
1
Press [y y y y y ] to turn the unit on.
2
Press [CLOCK / TIMER] to display "CLOCK".
Every time you press the button:
CLOCK PLAY
Original display
3
Within 10 seconds
Press [g, REW/ 4 4 4 4 4 ] or [f, 3 3 3 3 3 /FF] to set the
time.
Press and hold to change the time faster.
4
Press [CLOCK / TIMER].
The time is set and the original display is restored.
To switch to clock display (For Europe: only in CD/tape
mode)
Press [DISPLAY].
Each time you press the button:
Clock display ↔ Current display
To show the time (when the unit is ON)
Press [CLOCK / TIMER].
The clock is shown for about 10 seconds.
Note
The clock may lose or gain some time over a period.
Readjust if necessary.

Convenient Functions

B
by remote control only
To dim the display panel
Use this when you are going to sleep or any other time you
would prefer the panel to be dimmer.
Press [DIMMER].
The display panel dims except for the [AC IN] indicator.
To cancel
Press [DIMMER] again.
To mute the volume
This feature is convenient when you have a telephone call,
etc.
Press [MUTING].
"MUTING" appears.
To cancel
Press [MUTING] again. ("MUTING" goes out.)
Muting can also be cancelled by lowering the volume all the
way to (-- dB).
When the system is turned off, the muting operation will be
automatically cancelled.

Turning the demo function off

C
If the clock has not been set, a demonstration of the display
is shown when the unit is switched to standby.
This function is set to on at the time of purchase.
Press and hold [–DEMO] until "DEMO OFF" is
displayed.
The display changes each time the button is held down.
DEMO OFF (off) ↔ DEMO ON (on)
REC
RQT6682
9