Timers And Others - Panasonic SC-EN27 Operating Instructions Manual

Timers and others

Press[^] to turn the unit
on.
Setting
CLOCK/
TIMER ADJ
the time
Set the clock
This is a 12-hour
clock.
• To display the clock
when the unit is on
• To check the time when
the unit is off
Note
The clock is accurate to within ±60 seconds a month.
Readjust if necessary.
Set again after disconnecting the AC power supply
cord or power failure.
SLEEP
timer
• Each time you press the button:
SLEEP 30
The SLEEP
timer can turn
the unit off after
• To check the remaining time
a set time.
Note
The play timer and sleep timer can be used together.
The sleep timer always has priority. Be sure not to
overlap timer settings.
Sound
quality
Select the sound quality
You can choose
• Each time you press the button:
one of four types
of sound quality.
XBS
(Adds punch
to rock)
Live
Virtualizer
You can create a Press to turn the Live
three-dimensional Virtualizer ON/OFF
sound fi eld when
Note
listening to stereo
The actual effect depends on the source played.
sound.
OPEN/
DISPLAY CLOSE
SLEEP
1 2 3
CLOCK/
TIMER ADJ
4
5 6
TIMER
SET/CHECK
7 8 9
PGM/CLEAR
0 >
10
=
-AUTO PRESET
MUSIC PORT
CD
TUNER/
BAND
VOL VOL
SOUND LIVE PLAY
EQ VIRTUALIZER MODE
ALBUM
Within 10 seconds
3 4
u i
Select the time
• Press and hold to
change the time faster.
TIMER ADJ
SET/CHECK
SLEEP
SLEEP 60 SLEEP 90 SLEEP 120
OFF (Canceled)
Press once
SOUND
EQ
EQ EQ
CLEAR SOFT
(Clarifies higher (For background
music)
sounds)
EQ OFF (Canceled)
VOCAL
(Adds gloss to
vocals)
LIVE
VIRTUALIZER
Play timer
This timer starts
play of the
selected source
at the selected
time.
CLOCK/
TIMER ADJ
CLOCK/
TIMER
SLEEP
Display
You can change
the display.
5
Preparation: Set the clock (
1 Perform timer settings
Set the start time
While the time is displayed
Within 10 seconds
CLOCK/
TIMER ADJ
Select Select the start time
"zPLAY ON"
• Press and hold to
PLAY PLAY ON ON change the time
faster.
Set the end time
CLOCK/
3
4
TIMER ADJ
u i
Select the end time
Select
"zPLAY OFF" • Press and hold to
change the time
PLAY PLAY OFF OFF
faster.
2 Select the source and adjust the volume
MUSIC PORT
CD
TUNER/
BAND
q/h
Select the source
3 Turn the timer on
TIMER
SET/CHECK
Display "zPLAY"
PLAY PLAY
The unit must be off for the timer to be operated.
Note
You can enjoy any sources while the play timer is set.
The timer function will be canceled when you change
the frequency step. Follow the step 3 again while the
unit is on.
• To cancel the timer
while the unit is on
Note
The timer function will be canceled, but the settings
stay in the memory.
The timer comes on every day if the timer is on.
• To change the timer
• To check the setting
while the unit is off
Note
• If you turn the unit off and on again while the timer
is functioning, the fi nish time setting will not be
activated.
• When the "MUSIC P" source is selected, set the
timer on the connected equipment to the same time.
DISPLAY
The following types of information are displayed.
• Original display
• Time display
left).
3
4
u i
CLOCK/
TIMER ADJ
VOL
3 4 VOL
Adjust the volume
Turn the unit off
TIMER
SET/CHECK
Clear "zPLAY"
TIMER
SET/CHECK
Clear "zPLAY"and
set the timer again
TIMER
SET/CHECK
RQT8520