Specifications - Panasonic CQ-4330U Operating Instructions Manual

Specifications

❐ General
Power Supply:
Current consumption:
Maximum Power Output:
Tone adjustment range:
Bass:
Treble:
Power Output:
Suitable Speaker Impedance:
Dimensions (W × H × D):
Weight:
❐ FM Stereo Radio
Frequency Range:
Useable Sensitivity:
50 dB Quieting Sensitivity:
Frequency Response:
Alternate Channel Selectivity:
Stereo Separation:
Signal/Noise Ratio:
❐ AM Radio
Frequency range:
Usable sensitivity:
❐ Weather Band Radio
Frequency Range:
Useable Sensitivity:
Signal/Noise Ratio (40 dB/µV):
❐ Tape Player
Reproduction System:
Tape Speed:
FF/REW Time:
Frequency Response:
Wow and Flutter:
signal/Noise Ratio:
Above specifications comply with EIA standards.
Note: Specifications and design are subject to modification without notice due to improvements in technology.
Dobly noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol A are trademarks of Dolby Laboratories Licensing Corporation.
12 V DC (11 V-16 V) test Voltage 14.4 V, Negative ground
Less than 2.5 A (tape mode, 0.5 W 4-speaker)
37 W × 4 channels at 400 Hz, Volume Control maximum
± 12 dB at 100 Hz
± 12 dB at 10 kHz
18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD
4-8 Ω
7" × 1-15/16" × 6-1/10" (178 × 50 × 160 mm)
3 lbs. 12 oz (1.7k )
87.9-107.9 MHz
12 dBf. (1.1 µV/ 75 Ω, S/N 30 dB)
17 dBf. (1.8 µV/ 75 Ω)
30-15 000 Hz ±3 dB
75 dB
35 dB at 1 kHz
70 dB (Mono)
530 kHz–1 710 kHz
28 dB/µV (25 µV, S/N 20 dB)
162.40-162.55 MHz
3 dB/µV (S/N 20 dB)
50 dB
4-track, 2-program stereo
1-7/8"/sec (4.76 cm/sec)
Less than 110 sec (C-60)
35-14 000 Hz ±3 dB
0.12 % (WRMS)
52 dB (Dolby NR on: 62 dB)
29
CQ-4330U