Advertisement
Quick Links
Advertisement
Related Manuals for VISIO DL-10 QW 5A
Summary of Contents for VISIO DL-10 QW 5A
- Page 1 DMX Down Light DL-10 QW 5A User Manual...
-
Page 2: Table Of Contents
CONTENT 1. Safety Instructions ..................2 2. Features...................... 3 3. Technical Specifications ................3 4. How To Control The Fixture ................ 3 5. Installations ....................4 6. Lumen Output ..................... 6 7. Troubleshooting ..................8 8. Cleaning And Maintenance ................. 8... -
Page 3: Safety Instructions
1. Safety Instructions Please read the instructions carefully which includes important information about installation, operation and maintenance. WARNING Please keep this User Guide for future consultation. If you sell the fixture to another user, be sure that they also receive this instruction booklet. Cautions：... -
Page 4: Features
Please set up DMX address & Channel Mode of the fixture by VD-T (sold separately). VD-T is a specially designed handy setup tool for all Visio integral fixtures and controllers. By connecting VD-T to any unit via XLR, you can easily setup DMX Address, Channel Modes, White Balance, Manual Colors, and Fade Speed functions. -
Page 5: Installations
5. Installations 5.1 Before install the fixture, please ensure the power is off. 5.1.1 Choose the appropriate location and secure the fixture’s Armature to the location, then connect power cable and signal line, finally place the aluminum body into it. - Page 6 S i g n a l Li ne Power Cable 5.1.2 Connect the unit’s power cable and DMX signal cable to the main cables parallelly as indicated in 5.3 Connection Diagram. There are two wires (red and black) for power cable, red cable is positive, black cable is grounding. Three colors red, white and black for signal line, red line is (+), white line is (-) and black line is grounding.
-
Page 7: Lumen Output
5.3 Connection Diagram 6. Lumen Output Lumens：326.159lm Beam Angle: 10°... - Page 8 Lumens：263.372lm Beam Angle: 20°...
-
Page 9: Troubleshooting
7. Troubleshooting If the fixture does not work, no light, please check the connection of power cable and signal line, also measure the mains voltage on the main connector. 8. Cleaning And Maintenance The cleaning must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: moist, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the fixture. - Page 11 Declaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC. EN55014-2: 1997 A1: 2001, EN61000-4-2: 1995; EN61000-4-3: 2002; EN61000-4-4: 1995; EN61000-4-5: 1995, EN61000-4-6: 1996, EN61000-4-11: 1994.
- Page 12 Innovation, Quality, Performance...
Need help?
Do you have a question about the DL-10 QW 5A and is the answer not in the manual?
Questions and answers