Table of Contents
Advertisement
Network settings for the LAN Cable connection
This setting is for the network connection by using the LAN cable.
Select [Network Type] and set to [Wired]
1
Network Setup
Connection Test
Network Type
Wired
Access Point Settings
---
IP/DNS Settings
Network Link Settings
Software Update
MAC Address
12-34-56-78-9a-bc
Select [IP/DNS Settings] and set the items
2
Network Setup
Connection Test
Network Type
Wired
Access Point Settings
---
IP/DNS Settings
Access
Network Link Settings
Software Update
MAC Address
12-34-56-78-9a-bc
■
[Acquire IP Address]
■
[Acquire DNS Address]
Sets [IP Address], [Subnet Mask], [Gateway] and [DNS Address].
For most users, the recommended method of connection to your network is by using [Auto] feature.
Select [Acquire IP Address] and then set to [Auto]
Select [Acquire DNS Address] and then set to [Auto]
IP/DNS Settings
Acquire IP Address
Auto
IP Address
192.168.11.5
Subnet Mask
255.255.255.0
Gateway
192.168.11.1
Acquire DNS Address
Auto
DNS Address
192.168.11.1
Proxy Settings
select
access / store
If you make the network connection like "Example2" (p. 59),
you do not have to set [DNS Address], [Proxy] and
[Proxy Port].
select
access
After settings, return to [Network Setup] screen
RETURN
select
access / store
•
The available settings are displayed automatically.
61
Advertisement
Table of Contents
