Panasonic TC-P50ST30H Operating Instructions Manual page 42

[Auto Tuning]
1
Start Auto Tuning
Digital TV Auto Tuning
All digital TV tuning data will be erased
•
All the previous tuning settings are erased.
•
When the operation is completed, the channel at channel position [1] will be displayed.
•
Search begins in the order from the lower channels to the higher channels.
•
If tuning has not been done completely
[Manual Tuning]
Normally use [Auto Tuning] or [Update Channel List] to update Digital TV channels on your channel
list. If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
Digital TV Manual Tuning
Frequency
Signal Quality
Signal Strength
No. Channel Name
Digital TV: 0
[Update Channel List]
You can add new channels, delete duplicated channels, update channel name and position
automatically to Channel List.
Digital TV Update Channel List
Scan
This will take about 3 minutes.
CH Channel Name
Digital TV: 0
[New Channel Message]
Selects whether to give a notification message when a new Digital TV channel is found. [Off] / [On]
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
[Signal Condition]
Selects a channel and checks the Digital TV signal condition.
•
To change the channel
Digital TV Signal Condition
Channel Name
Signal Quality
Signal Strength
Network Name
Parameter
42
- Set all Digital TV channels automatically
2
Settings are made automatically
Digital TV Auto Tuning
Scan
This will take about 3 minutes.
CH
32
32
32
Digital TV: 3
- Set Digital TV channel manually
MHz
[CH21] 474,00
0 10
0 10
Type New
•
All channels found will be added to the Digital TV Channel List.
- Update channels automatically
•
Channel List is updated while keeping your settings in
CH 2 69 [Favourites Edit], [Channel List], [Child Lock], etc.
•
Depending on the signal condition, the update may not work
Type Quality
properly.
Searching
- Display a notification message
•
Selecting OK will perform [Update Channel List].
- Check Digital TV signal
CH
1 TEN Digital
90 %
These bars show the maximum signal value of the
80 %
RiksTV selected channel.
[CH32] 562.00 MHz
A good Signal Strength is not an indication of suitable signal for
Digital TV reception. Please use the Signal Quality indicator as
follows:
[Signal Quality]:
•
Green bar
•
Yellow bar
•
Red bar
CH 2
Channel Name Type Quality
TV Finland Digital TV 1
TV Finland Digital TV 1
SVT HD Digital TV 1
Radio: 0
Searching
[Manual Tuning] (see below)
select frequency
select offset
start scan
Good
Poor
Bad (Check the aerial)
Automatically retune
69
all Digital TV channels
received in the area.