Download  Print this page

Troubleshooting - Philips DVP3602 User Manual

Hide thumbs

Advertisement

Accessories supplied
Remote control and one battery
User Manual
Laser specification
Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
Wave length: 658 nm (DVD), 790 nm
(CD)
Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
Beam divergence: 60 degrees
Downloaded From Disc-Player.com Philips Manuals

6 Troubleshooting

Warning
Risk of electric shock. Never remove the casing of the
player.
To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, get support at
www.philips.com/support. .
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. _____________________________
Serial No. _____________________________
No picture.
Refer to the TV user manual for how to
select the correct video input channel.
If you have turned on the progressive scan
or changed a TV system setting, switch
back to the default setting: 1) Press to
open the disc compartment. 2) Press
DISC MENU (for progressive scan) or
SUBTITLE (for TV system).
No sound output from the TV.
Make sure that the audio cables are
correctly connected between this player
and the TV.
No audio output from the loudspeakers of the
connected external audio device (for example,
stereo system, amplifier receiver).
Make sure that the audio cables or coaxial
cable are correctly connected.
Switch the external audio device to
correct audio input source.
Disc cannot be read.
Make sure that this player supports the
disc (see "Specifications" > "Playable
media").
EN
13

Advertisement

Table of Contents

   Also See for Philips DVP3602

   Related Manuals for Philips DVP3602

Comments to this Manuals

Symbols: 0
Latest comments: