Panasonic Strada CN-NVD905U Upgrade Manual page 10

XM Satellite Radio control
Select a category
 To turn the category selection on
1 Select [Setup].
 The XM Setup screen is displayed.
2 Select [On] from "Category".
 Select [Off] to turn the category selection off.
 To select a category
Select [] or [].
 The category switches.
Note:
 It is not possible to select a category if "Category" is
set to [Off].
10
10
(continued)
Preset memory
The channel being received can be stored manually
under a selected number.
Select the channel, then touch and
hold the number under which you
wish to store the channel for at least
2 seconds.
 The channel being received is stored under the
selected number.
Note:
 6 channels can be stored for each channel list (XM1,
XM2, and XM3). (18 channels in total)
 Select [Band] to switch between channel lists.
The channel list switches as shown below each time
[Band] is selected.
XM1 XM1 XM2 XM2
 Select a stored channel
Select a channel (number) from the
preset channels.
 The channel switches to the selected channel.
XM3 XM3