Adjustment - Kenwood KDC-3016RG Service Manual

KDC-3016RG/303RG/3080RA/RG/RYA/RYG
NOTE
1. For arm ass'ies Nos.6 and 7 used in the CD mechanism
ass'y, use the combination of the following parts.
Ref.No. Parts No.
6 D10-4306-04
7 D10-4305-04
2. The parts numbers of arm ass'ies Nos.6 and 7 shown in the
exploded view of CD mechanism ass'y are D40-4306-04
and D40-4305-04 respectively.
TEST MODE
1. To enter test mode
While holding the "FM" key and preset "6" key, reset the unit.
All indication segments are ON at the beginning of test mode.
2. To release test mode
Simply reset the unit.
(NOTE) The test mode is not canceled by ACC OFF, power
OFF, momentary power down or the panel detaching.
3. CD receiver test mode specification
Pressing the "Track up" key jumps between tracks in the
following order.
No.9 No.15 No.10
No.9 (Same as the beginning)
Pressing the "Track down" key jumps to the previous track to
the being played.
Pressing the preset "1" key jumps to No.28 track.
4. Audio adjustment
The volume is set to -10dB (which is shown as 30).
Loudness is OFF.
The BASS / TREBLE and BALANCE / FADER controls can
be set to the full boost / full cut and full front / full rear
respectively by pressing the "Track UP" / "Track DOWN" keys.
Sound coordination doesn't appear for the feed.

ADJUSTMENT

Parts No.
D10-3083-44
D10-3084-44
No.11 No.12 No.13 No.14
6