Electrolux ESF6510LOW User Manual page 59

7.1 Using the detergent
D A B
30
20
A B D
3 0
2 0
7.2 Setting and starting a
programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
• You have not closed the door.
• You have not pressed Start to start the
programme.
• The programme is completed.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. The indicator and the dura-
tion of the last set programme come
on.
3. Close the appliance door.
4. Set a programme.
• If you want to start the last set pro-
gramme, press Start.
1.
2.
3.
4.
C
5.
A
-
+
C
Press the release button (B) to open
the lid (C).
Put the detergent in the compartment
(A) .
If the programme has a prewash
phase, put a small quantity of deter-
gent in the compartment (D).
If you use detergent tablets, put the
tablet in the compartment (A).
Close the lid. Make sure that the re-
lease button locks into position.
• If you want to set a different pro-
gramme, press Program again and
again until the indicator of the pro-
gramme you want to set comes on.
You can also set the applicable op-
tions.
The display shows the duration of the
programme.
5. Press Start to start the programme.
• The washing phase indicator comes
on.
• The programme duration starts to
decrease with steps of 1 minute.
Starting a programme with delay
start
1. Set the programme.
2. Press Delay again and again until the
display shows the delay time you want
to set (from 1 to 24 hours).
3. The countdown starts automatically.
When the countdown is completed. The
programme starts.
ENGLISH 59