Table of Contents
Advertisement
Section 7
Description of the Airplane and Systems
2. Airport Filter – The Airport Filter page allows you to set criteria for nearest airport
searches of the database. You can select towered and/or non-towered airports, the type of
surfaces you prefer to land on, and the minimum runway length based on your particular
aircraft or type of flying. The values selected on this page also dictate the types of airports
that get displayed on the map.
e
Figure 7 - 41 shows the following item
a. Airport Type – Select Towered, Non-Towered, or both.
b. Surface – Select between hard, soft and/or water surfaces.
Display of airports with both hard surface and water runways requires that
the hard surface box be checked.
c. Minimum Runway Length – select the minimum runway length from 2000ft. - 7000ft.
or show all lengths.
d. Selection Control – Use right knob to move the blue field selector.
e. Change Control – Use left knob to change the value or status of the selected field.
f. Save – Saves settings and returns to main setup page.
g. Cancel – Cancels any changes and returns to main setup page.
3. Declutter – The Declutter page is used to define the navigation symbols and default display
settings for the Declutter button. Individual items can be selected for display or a pre-
defined group of items can be selected by choosing VFR or IFR defaults.
RC050002
7-114
a
c
Figure 7 - 41
s:
NOTE
Columbia 400 (LC41-550FG)
f
b
g
Initial Issue of Manual: November 10, 2004
Latest Revision Level/Date: A/12-01-2004
d
Advertisement
Chapters
Table of Contents
