Programing Your Timer - Orbit Signature ST2-RF Manual

• Press the
ENTER button. The display now reads "SET
MONTH." Set the current month by pressing either the
or button.
• Press the
ENTER button. The display now reads "SET
DATE." Set the current day of the month by pressing either
the or button.
• Exit the set time and date mode at any time by turning the
selection dial.
Determine a Watering Plan
See page 20 for instructions.
Section 3: Programming Your Timer
Figure 2: Program A and Program B Dial Settings
Set Start Times
IMPORTANT: Multiple start times in Program A will repeat the water-
ing program. Generally, only one cycle start time is required for each
program (A and B) Start times do not correspond to individual stations.
6
• Turn the selection dial to
START TIMES for the program you
wish to set (A or B).
• Set Start Time 1 using the
and buttons.
• If you wish to set additional start times (up to six) for the same
program, press the NEXT button or ENTER button.
• To remove a start time press
CLEAR C .
• Exit the set start time mode by turning the selection dial.
Set Station Watering Durations
• Turn the selection dial to
DURATION for the program you
wish to set (A or B).
• Set the desired duration (0 - 120 minutes) for the station
displayed. Press NEXT or ENTER to advance to
the next station. Press CLEAR to remove a duration.
C
IMPORTANT: Each station can have two durations. For example:
Station 1 can have a duration of 5 minutes in Program A and a
duration of 25 minutes in Program B. Typically a station has only
one duration in either Program A of B. A station with a setting of 0
minutes will not water with that Program.
• If two programs are needed repeat these steps for the other
program.
• Exit the set watering durations mode by turning the
selection dial.
Set Watering Days
• Turn the selection dial to
WATERING DAYS for the program
you wish to set (A or B).
Set to Water - Days of the Week:
• Press the
NEXT button to move through the days of
the week. The selected day will flash.Press ENTER and
a water drop appears above that day of the week. The pro-
gram is now set to water on that day. The program can be set
to water any combination of days (ex. Mo, We, Fr).
• To deactivate watering for a particular day, press the
CLEAR C button. The water drop will disappear.
Set to Water - Odd Days:
• Press the
NEXT button until "ODD" flashes.
• Press the
ENTER button. A water drop will appear
above "ODD."
• You can deactivate the "ODD" mode by pressing the
CLEAR C button or by selecting another watering day
mode. The water drop will disappear.
Set to Water - Even Days:
• Press the
NEXT button until "EVEN" flashes.
• Press the
ENTER button. A water drop will appear
above "EVEN."
• You can deactivate the "EVEN" mode by pressing the
CLEAR C button or by selecting another watering day
mode. The water drop will disappear.
Set to Water - Interval
• Press the
NEXT button until "INT" (interval) flashes.
• Press the
or buttons to select the desired interval
(select between every 1 day and every 32 days). An interval
of "2" means it will water every other day.
• You can deactivate the "INTERVAL" mode by pressing the
CLEAR C button or by selecting another watering day
mode. The water drop will disappear.
Set the Timer to Automatically
Run Your Programs:
• Turn the selection dial to AUTO. The timer will be controlled
automatically by the programming parameters that have been
set.
To Turn All Watering Off:
• Turn the selection dial to
OFF . This prevents the timer from
turning any watering station on at any time, regardless of
programming.
To Prevent Watering on a Particular Day:
There may be one or more days of the week when you never
want to have the water turn on, regardless of what the program
7