Table of Contents
Advertisement
Adjustment
■ To adjust
The next 2 pages show Data for adjustment.
To select adjustment item, press (↑) button on the remote control unit.
To adjust data, press (→) button ( The characters of data become yellow.) and press (↑) or (↓) button to change
data.
1) Select adjustment item by (↑) but-
ton.
Adjustment item displays in order. To reverse
adjustment item, press
2) Press (→) button to change color
of characters (of data).
The character of data become yellow by pressing
(→)
button.
3) Adjust the data by (↑) (↓) button.
To adjust another item, press
change color of characters of adjustment item
and repeat 1) to 3).
4) To exit the Service Mode.
To exit the service mode, press
OFF
button on the monitor or remote control
unit.
The all data adjusted in service mode memorizes into non-volatile memory IC.
Note: In the explanation all buttons are indicated for remote control unit without any notice.
(↓)
button.
←
(
)
button to
POWER ON-
Service Mode Display
Av-Dynamic
0
Cont
Av-Dynamic
0
Cont
Number
Adjustment Item
(↑)
Select by
Button
and
(→)
Press
Button
-16-
63 (3F)
42H1
Main
103
Sub
040
63 (3F)
Data
(↑)
Adjust by
(↓)
Button.
(
)
Hex decimal data
or
Advertisement
Table of Contents
