Table of Contents
Advertisement
Cautions:
• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands
and fingers.
First complete the electrical connections, and then check them for
The included Mounting Collar q is designed specially for this unit. Do not use it to attach any other model.
Power Connector
Engage the Mounting
Springs (C) in the
mounting holes of the
Mounting Collar q
firmly.
Mounting Spring
24
CQ-5335U
Mounting springs (C)
Mounting
Hole
correctness.(a
page 26)
Insert Mounting Collar q into the
1
dashboard, and bend the mounting tabs
out with a screwdriver.
The tabs to be bent vary depending on
the vehicle. To securely install the unit,
fully bend a number of the tabs so that
there is no rattling.
Example:
q Mounting
Collar
Mounting Holes
Mounting Bolt
Establish the rear connection of the unit.
2
After fixing Power Connector, fix the rear of the unit
to the vehicle body by either method (a) or (b)
shown in the previous page.
3
After installation reconnect the negative
(–) battery terminal.
Tab
Hide quick links:
Advertisement
Table of Contents
